Customization: | Available |
---|---|
After-sales Service: | 24 Hours After-Sale Service Hotline |
Warranty: | 12months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | ZZ3167M3811 Driving type: 4*2 left hand driving | |||||
Engine | Make: SINOTRUK | |||||
Diesel 4-stroke direct injection diesel engine | ||||||
Engine model: WD615.87, Euro II emission standard | ||||||
6-cylinder in-line with water cooling, turbo-charging and intercooling | ||||||
Maximum output: 290 hp (213 Kw) at 2200 rpm | ||||||
Maximum torque: 1160 Nm at 1100-1600 rpm | ||||||
Number of cylinder: 6 | ||||||
Displacement: 9.726 L | ||||||
Bore: 126 mm | ||||||
Stroke: 130 mm | ||||||
Specific fuel consumption: 198 g/kWh | ||||||
Engine oil filling quantity: 19 l | ||||||
Cooling system filling quantity (long-term filling): 40 l | ||||||
Thermostat with 71ºC opening begin | ||||||
Twin cylinder air compressor | ||||||
Rigid fan | ||||||
Transmission | HW15710,10 speeds forward and 2 speeds reverse | |||||
Ratio: 14.28 10.62 7.87 5.87 4.375 3.26 2.43 1.8 1.34 1 13.91(R1) 3(R2) | ||||||
Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |||||
Front Axle | HF9, Steering with doubleT-cross section beam | |||||
Rear Axle | HC16, Pressed axle housing, central single reduction with hub reduction and with differential locks between wheels and axles . | |||||
Ratio:5.73 Option: 6.72 | ||||||
Chassis | Frame: U-profile parallel ladder frame with section of 300x80x8mm, and reinforced subframe all cold riveted cross members | |||||
Front suspension:10 semi-elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer | ||||||
Rear suspension:12 leaf semi-elliptic springs, bogie spring and stabilizer | ||||||
Fuel tank: 300 L capacity with locking fuel cap, fitted to the off side of the chassis | ||||||
Spare wheel | ||||||
Steering | Z F power steering, modol Z F8098, hydraulic steering with power assitance | |||||
Ratio:22.2-26.2 | ||||||
Brakes | Service brake: dual circuit compressed air brake | |||||
Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels | ||||||
Auxiliary brake: engine exhaust brake | ||||||
Option:ABS | ||||||
Wheels & Tyres | Rims: 8.5-20, 10 hole-steel | |||||
Tyres: 12.00R20, option: 12.00R22.5 Nos:6+1(spare) | ||||||
Driver's Cab | Standard cab,all-steel forward control,550 hydraulically tiltable to the front,2-arm windscreen wiper system with three speeds,laminated | |||||
windscreen with casted-in radio aerial,hydraulically damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, | ||||||
safety belts, adjustable roof flap, adjustable steering wheel, air horn,air conditioner , with transverse stabilizer,with 4-point support fully | ||||||
floating suspension + shock absorber | ||||||
Electrics | Operating voltage: 24 V, negative grounded | |||||
Starter: 24 V, 7.5 Kw | ||||||
Alternator: 28 V, 1500 W | ||||||
Batteries: 2 x 12 V, 165 Ah | ||||||
Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light | ||||||
Instrument Panel | Active check central controllor with indicators, with this integral instrument the daily manual checks on the vehicle and combined indicators | |||||
of compressed air pressure, coolant temperature, engine oil pressure and battery charging | ||||||
Dimensions mm | Wheel base | 3825 | ||||
Front wheel track | 2022 | |||||
Rear wheel track | 1830 | |||||
Approach angle (0) | 19 | |||||
Departure angle (0) | 20 | |||||
Overall length | 7230 | |||||
Overall width | 2496 | |||||
Overall height | 3200 | |||||
Dimension of the rear dump body | 4190*2300*1100 | |||||
Weight kg | Dead weight | 8100 | ||||
Gross vehicle weight | 25000 | |||||
Front axle loading capacity | 9000 | |||||
Rear axle loading capacity | 16000 | |||||
Performance | Maximum driving speed (km/h) | 75 | ||||
Maximum gradeability (%) | 40 | |||||
Minimum ground clearance (mm) | 314 | |||||
Fuel consumption (l/100 km) | 26 | |||||
The manufacturer reserves the right of technical alteration/change for better improvement without prior notice! |
Q1: I don't want this configuration. |
A: The configuration can be changed according to your needs |
Q2: Minimum order quantity? |
A: MOQ is 1 unit. |
Q 3: Production period? |
A: (Truck & trailer) Within 30 days since the moment we got your down payment (Parts) Within 7 days since the moment we got your down payment |
Q 4: Payment term? |
A: (Truck & trailer) 30% T/T as deposit, the balance should be paid before delivery. or L/C (Parts) 100% T/T should be paid before delivery |
Q 5: Shipping? |
A: (Truck & trailer) by container or RoRo/Bulk shipment. (South America, Middle East, Africa, Oceania etc.) by road or railway.(Russia, Mongolia, Kazakhstan, Uzbekistan , Vietnam, Laos etc.) (Parts) by international courier service, such as DHL, TNT, UPS, or Fedex. The goods above $1000 can be shipped by sea |
Q 6: Can you supply some quick-wear truck or semi trailer parts ? |
A: Yes, we can supply truck and semi trailer parts as your request,such as oil filter, fuel filter, air filter, traction, traction pin, balance beam and semi-trailer plate spring, hanging accessories, turntable, all kinds of trailer brake pads, brake pan, bearings etc. |